Table of Contents
Introduction of 10,000-200,000 tons of chicken manure organic fertilizer production line:
The chicken manure organic fertilizer production line with an annual output of 10,000 to 200,000 tons basically covers 80% of the organic fertilizer processing capacity. Others have an output of 5,000 tons to 10,000 tons and below 5,000 tons, and there are extra-large chicken manures of more than 200,000 tons. Organic fertilizer production line equipment. This set of equipment is popular in the market for its environmental protection, cleanliness, and minimal emissions. Let’s talk about how this organic fertilizer production line uses chicken manure organic fertilizer equipment to achieve environmental protection.
How to make chicken manure as fertilizer?
Of course, Chicken manure can not be used as fertilizer without the treatment and processing of Chicken organic fertilizer production equipment. At present, the following two methods are used in the processing of Chicken manure organic fertilizer.
1. Simpler, fermented, mixed, and crushed into powder, directly used as fertilizer;
2. The powder enters the chicken manure organic fertilizer granulator for granulation, and is dried, cooled, and packaged as a commercial organic fertilizer to open a new way to increase revenue. Among them, method one is actually one of the leading steps of method two, and we will use method two to explain in detail how to do it.
Environmental protection equipment and technology required for the production line of chicken manure organic fertilizer with an annual output of 10,000 to 200,000 tons:
1. Harmless decontamination fermentation
In the fermentation, the stage is the process of decomposing is also the process of removing the odor of chicken manure. The focus of environmental protection is not to emit peculiar smell but to be fully decomposed and harmless. Therefore, it is necessary to collect chicken manure in a closed manner, and no peculiar smell can be produced during the transportation of chicken manure. Spread, so it is essential to build an environmentally friendly fermentation tank. The other operation is to pile the chicken manure into the fermentation tank. The details are that it is mixed with hay straw and chicken manure or other manure. After waiting, the organic materials are made into compost and allowed to fully ferment. During the fermentation process, the stacker is used to fully ferment the materials. In composting, the materials are not evenly wet and dry, and some places are very wet and some are dry, which seriously affects the quality of fermentation. This is the reason why Composting machinery must be used for fermentation.
2. Ingredients and high-humidity semi-humid crushing and mixing
In the automatic batching system, the materials after composting and N, P, K, and other inorganic fertilizers and other additives are passed through a material pulverizer and a horizontal mixer in a certain proportion for crushing, proportioning, and mixing. Based on many years of experience, the equipment recommendations are as follows: using a vertical grinder to crush chicken manure compost is not easy to stick to the wall, not easy to block, multi-layer turbulent chain hammer structure improves the crushing performance; the continuous automatic batching system is suitable for the dynamic measurement of organic fertilizer raw materials And batching control; The mixing operation is equipped with a dual-axis continuous mixer, which has good sealing performance, and the sticky wet material is not easy to adhere to the root of the mixing shaft.
3. Granulation system
Use New type organic fertilizer granulator to granulate the material. The function of the system is to make particles of the material after the crushing ingredients are mixed completely. The advantages of the granulator are wide raw material adaptability, especially suitable for organic materials, wide raw material density and raw material moisture requirements, stable granulation, high particle forming rate, uniform appearance of finished particles, and not easy to break.
4. Drying, drying, and cooling
Use an organic fertilizer dryer to further remove water from the granulated particles to meet the standard requirements of organic fertilizer moisture content. Use a cooler to cool the granular materials, which is helpful for the storage and quality of the granules. After cooling, the difference between the temperature of the granules and the ambient temperature is less than 5°C.
5. Screening, classification, and automatic packaging
Here, it is sieved and classified, and the particles that meet the requirements are transported to the packaging machine, and the unqualified conveyor returns to the pulverizer for smashing and re-granulation.