Branch crusher/Tree branch shredder/Branch shredder chipper

Branch crusher introduction:

Branch crusher is also called tree branch shredder, branch shredder machine, branch shredder chipper, tree branch shredder machine. It is a combination of slicing and crushing. It can cut branches and branches with chip diameters of 1–30 cm. It is mainly used for processing pine and miscellaneous wood. Wood, Yangmu, Chinese fir, raw bamboo, and other materials.

Branch crusher uses:

Tree branch shredder is a series of special Wood crusher equipment invented after years of research and design according to the needs of my country’s industrial production. The Branch shredder chipper can also be used as the raw material for particleboard and sawdust board high-density board. This series of equipment is suitable for mobile operations and is widely used in the preparation section of small and medium-sized particleboard and fiberboard manufacturers. It can also be used for individual businesses to produce commercial wood chips. Our company is often used in the Fertilizer production line.

What is the purpose of the wood chips produced by the Branch crusher?

1. The smashed sawdust from the Branch shredder chipper can be used to grow shiitake mushrooms and fungus.
2. Sawdust can make paper
3. Sawdust can be used to make plates
4. Processing into biomass fuel pellets by Tree branch shredder machine is also a lot of projects
5. Make mosquito coils
6. Processing mechanism charcoal
7. Make organic fertilizer, etc.
8. Resource regeneration, turning waste into treasure

Branch crusher structure and maintenance:

The Tree branch shredder machine is composed of three parts: upper, middle, and lower body. The middle part is equipped with a triple stator ring, crushing cutter, and fineness analyzer. After long-term use of a Tree branch shredder, various problems may occur. Mechanical problems will affect our normal production. We need to maintain and repair the machinery, and we will introduce you to the solutions to common problems of Branch shredder chipper today.
1. What to do with the cracks at the rivet hole
Use a new welding rod to weld the cracks centered on the impeller axis line, and use a new welding rod to repair the symmetrical rivet hole cracks. All the remaining welding rods must be left. In order to ensure that the weight of the welding repair is equal, use the remaining two The electrodes must be of equal length.
2. What to do if the bearing is overheated
Over-tightening of belts, damaged bearings, or unbalanced rotors and bent shafts will cause the bearings to overheat. What should I do if I want to solve it? Adjust the belt tightness, add and replace engine oil, and replace rotors, shafts, bearings, etc., all can be tried.
3. What to do if the Branch shredder machine is blocked
The blade is aging or broken; the hole of the screen is blocked or broken, etc., which will cause the tree branch shredder to block. What should I do if I want to solve it? Check the use of the blades in time, and replace them when problems are found; clean the screen regularly to ensure that the screen is tidy.
4. What to do if the output of the mill is “rough”
Due to the change in the properties of the input material or the improper feeding operation, the mill will experience “full grinding” or “grinding dead”, resulting in the sudden increase in the fineness of the output material. At this time, the feeding amount should be adjusted first to restore the material balance, so that the fineness of the grinding material reaches the normal control range.

Branch crusher for sale:

Our company sells Branch crushers, Wood shredder, Garden wood chipper, sawdust shredder, sawdust shredder, etc., each of which is divided into multiple models. If necessary, please contact us for detailed information. We will recommend the most suitable one for you. Branch shredder chipper.