Table of Contents
Introduction of Chain plate type fermentation turning and polishing machine:
Chain plate type fermentation turning and polishing machine has high working efficiency and thorough fermentation, so it is favored by the organic fertilizer equipment market. There are several types of common chain-plate stacker models, mainly based on the width and capacity as a reference to sub-models. In the organic fertilizer fermentation process, the Chain plate type fermentation turning and polishing machine promotes aerobic fermentation in the fermentation process of raw materials through sufficient turning and stirring to accelerate the fermentation effect and achieve the purpose of fully decomposing.
Chain plate type fermentation turning and polishing machine:
Let’s take a look at the classification of the models first. According to the models, there are two models, FLB40-3/4, FLB503/4/6, three FLB240D/the 40S, and a total of 8 models. The annual production capacity ranges from 7,500 tons to -30,000 tons. The required power varies. The different requirements for annual output must also be determined in conjunction with the fermentation tank.
|Specification model||Yield||Equipment span (m)||Material thickness
Chain plate type fermentation turning and polishing machine process:
Chain plate fermentation stack-turning machine and tilting machine have an obvious promoting effect on the complete fermentation of organic fertilizer. Mainly due to its superior performance. Slot chain plate pile machine the groove width of 2 meters, to reach 12 meters, short fermentation cycle, day treatment, annual production capacity is big, furnished without coercion oxygen supply system, the machine is in the process of double-throw even, no dead Angle supplemental oxygen material, the material layer of oxygen strong penetrating power, even fermentation, can make the material the slots in the translation, can also be automatically discharging when stacking. The innovation of this machine is to make full use of the deep pool design can realize automatic discharge, the use of a limited ground area of organic waste harmless treatment scale has become a reality.
Advantages of Chain plate type fermentation turning and polishing machine:
1. The lifting chain of the chain-plate stacker adopts a special chain, which has a long service life and is safe and reliable; the lifting mechanism is hydraulically driven, and the operation is stable and reliable.
2. The Chain plate type fermentation and Polishing machine adopt intelligent automatic control of the stacking process of fermentation materials, and the design of one machine and multiple tanks realizes integrated innovation of large-scale production, with a small footprint, low energy consumption, and large production capacity. Fast stacking speed, wide adaptability of raw materials, stable product quality.
3. Chain type stacking machine equipment span is larger, deeper dumping scale. When turning over and throwing, the material stays on the pallet for a long time, the high position is scattered, and the air contact is sufficient, easy to reduce moisture. By horizontal and vertical displacement can achieve any position in the tank toss operation, flexible.
4. Adopting tank-type continuous aerobic fermentation technology to quickly decompose, dehydrate, sterilize, and deodorize organic wastes to achieve the purpose of harmlessness, resource utilization, and reduction treatment. The fermentation cycle is short and the energy consumption is low. , Product quality is stable.
5. The chain-plate stacker does not need external ventilation, provides sufficient oxygen, inhibits anaerobic bacteria, and thoroughly controls the occurrence of odor.
6. Equipped with moving machine slot change can realize a flip machine multi-slot operation, save investment.