Horizontal mixer

Horizontal mixer introduction:

A horizontal mixer is a machine used for mixing more than two kinds of fertilizers. This machine makes the materials fully mixed, thereby improving the uniformity of mixing; the horizontal mixer produced by Tianci adopts a novel rotor structure, and the minimum gap between the rotor and the bright body is adjustable Close to zero, effectively reducing the amount of residual material; it can crush larger materials, the overall structure is more reasonable, the appearance is beautiful, and the operation is simple.

Working principle of Horizontal mixer:

The Horizontal mixer is used to turn materials in the cylinder under the action of internal and external screws on the mixer shaft. Ribbon will be material by the middle to the two side, outside screw with the material from two side to the center, and permeability of mixed material in screw with rotating back and forth, along with the radial movement, change, and thus formed the convective circulation, due to the movement of the mixing, the material in a short time to obtain fast mixing, the use of special sealing of the shaft sealing on both ends, powder fluid leak-off, sealing material replacement cost is low, Easy to replace, so it is a wide use, strong adaptability, good effect of high efficiency mixing equipment.

Features and applications of Horizontal mixer:

The horizontal barrel of the Horizontal mixer is equipped with two-axis rotating reverse blades. The blades circulate and stir the materials in the axial and radial directions at a certain angle so that the materials are mixed quickly and evenly. Performance characteristics of the horizontal mixer. The reducer drives the shaft. The rotation speed and the structure of the blade will weaken the gravity of the material. With the lack of gravity, the difference in particle size and specific gravity of each material is ignored in the mixing process. The intense stirring movement shortens the mixing time, making it faster and more efficient. Even if the material has a difference in specific gravity and particle size, it can achieve a good mixing effect under the rapid and violent tumbling of the staggered mixing blades. The mixing uniformity is high, the residue is small, and it is suitable for mixing more than two kinds of fertilizers and additive premixes.

Main technical parameters of Horizontal mixer:

Model	Production capacity(t/h)	power(kW)
700×1500	2-3	5.5
800×1800	3-5	7.5
1000×2000	5-8	11

Horizontal mixer installation:

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2. the installation should pay attention to the main body and horizontal vertical.
3. After installation, check whether the bolts in all parts are loose and whether the door of the main engine warehouse is fastened. If so, please tighten it.
4. According to the power of the equipment, configure the power cord and control switch.
5. After the inspection is completed, a no-load test run is carried out, and the test run is normal and production can begin.