Table of Contents
Introduction of Vertical Crusher Machine:
Vertical Crusher Machine is divided into three types: chain type, hammer type and blade type. It is used to crush organic fertilizer raw materials and returned materials, and is also suitable for crushing materials with relatively low moisture content, so it is also called semi wet fertilizer crusher.
Introduction of Vertical Semi wet fertilizer crusher:
Semi wet fertilizer crusher is divided into vertical type and horizontal type. This article mainly introduces Vertical Crusher. The allowable value of the water content of the bio-fermented organic fertilizer material reaches 25-50%, and the crushing particle size meets the requirements of granulation. It can also be adjusted within a certain range according to customer needs.
Vertical Crusher Machine application:
Vertical Crusher Machine is widely used. It can be crushed with organic fertilizer, livestock and poultry manure, and can also be used for crushing various materials such as limestone, cement clinker, mixture, gypsum, coal gangue, slag, copper ore, iron ore, etc. As mentioned above, it is suitable for the crushing and crushing of fertilizers and mineral processing equipment.
How the Vertical Crusher Machine works:
The material enters from the feed inlet and collides with the high-speed rotating chain hammer in the casing. After the impact, the material is squeezed and broken, and then hits the inner wall of the casing and then collides with the chain hammer. This is in the process of falling. After several impacts, the medium becomes powdery or particles below 3mm are discharged from the lower part.
Vertical Crusher Machine structure composition:
The structure is composed of a housing, shaft seat, spindle, chain hammer, chain hammer bracket, motor and other parts. The power coupling drives the spindle to rotate. The spindle has a bearing. The bearing is installed on the upper end of the housing. The spindle is equipped with chain hammers and chains. The hammer bracket and the feeding hopper are installed on the upper part of the casing. In order to facilitate the loading and unloading of the chain hammer, there is a valve on the casing for easy disassembly, assembly and maintenance.
Features of Vertical Crusher:
(1) Simple and reasonable structure, low operating cost. The use of stone to stone principle, wear small.
(2) High crushing rate and energy saving.
(3) It has the function of fine crushing and coarse grinding.
(4) Materials that are less affected by the moisture content of the material and whose moisture content is less than 50% can be crushed.
(5) The working noise is lower than 75 decibels (db level), and there is little dust pollution.
(6) Suitable for crushing medium-hard and extra-hard materials.
(7) the impeller liner wear is small, easy maintenance.
(8) It has strong adaptability to materials with higher moisture content, not suitable for clogging, and smooth feeding.
(9) The inner wall of the semi wet fertilizer crusher casing is lined with polypropylene board, the crushed material does not stick to the wall and is easy to clean. .
(10) The blade of the semi wet fertilizer crusher is made of special steel linden, which can effectively improve the production efficiency.
Tianci Vertical Crusher Machine manufacturer:
Zhengzhou Tianci Heavy Industry is a manufacturer of Organic fertilizer production line equipment. It processes Vertical Crusher with reliable performance, low power consumption, good crushing effect, and thoughtful and timely after-sales service. When selecting, you can directly bring the material to the factory for test machine verification.